1. Product type

      External corner to pool edging tile

      External corner to pool edging tile

      External corner to pool edging tile Residence

      Internal corner for pool edging tile

      Internal corner for pool edging tilelower edge unglazed

      Internal corner for pool edging tile Residence

      Pool edging tile

      Pool edging tile („half-size“)

      Pool edging tile („half-size“)lower edge unglazed

      Pool edging tilelower edge unglazed

      Pool edging tile Residence

  2. Format | Nominal size

    25 x 30 cm

    Shaped piece

Structure

System Solution

  1. UW-Silicone
  2. Closed-cell polyethylene foam round lace
  3. Elastic water-resistant filling material
  4. Joint band
  5. Slide bearing
  6. Plastic cover grating
  7. Capillary barrier / grouting (reaction resin filler)
  8. Waterproof concrete (according to DIN EN 206/DIN 1045/DAfStB WU Guideline
  9. Conventional thick-bed laying
  10. Thin-bed laying on cement render (P III, CS IV without added lime)
  11. Sealing layer
  12. Sealing tape
  13. “Silent W 2000” outlet valve
  14. “Silent 100” outlet valve
  15. Epoxi for joints, for the project sector
  16. Section stoneware pipe
  17. Casing for water inlet/outlet pipe and brazing collar

active azure
light azure
neutral 10 (active white glossy)
neutral 10 (active white matt)
neutral 10 (active white)
neutral 10 (white) / neutral 10 (active white glossy)
neutral 10 (white) / neutral 10 (active white matt)
neutral 10 (white) / active azure
neutral 10 (white) / light azure
neutral 10 (white) / neutral 1 (black)
grey-beige
grey-beige / neutral 10 (active white glossy)
grey-beige / neutral 10 (active white mat)
grey-beige / active azure
grey-beige / light azure
grey-beige / neutral 1 (black)
neutral 1 (deep black)